Description
The Maven Performance billet steel turbo mount supports the turbo from the bearing housing at the drain interface.
This mount was designed specifically for small frame turbochargers, such as the Borg Warner S300 Series and Precision Turbos (60-70mm range).
Features:
- Designed & machined in the usabillet steel – 1018 crs2 different tube diameter pockets
- 1.125″ & 1.25″center mounting on bearing housing
- 12 orb/an draino-ring seal
- no gasket required
- bearing housing can pivot 360 degrees without interference
- weighs just 9.5oz
- measures 3.75″l 1.35w 1.125h