Description
This Turbo blanket fits most non wastegated T3 or T4 flange turbos comes with tie wire for installation. Most S300 and S400 single turbo applications.
* Faster Spool Up.
* Lower underhood temps.
* Cooler Intake air temps.
* Lower exhaust gas temps.
* Fast Install, usually less than 15 minutes.
* Will not become brittle, stays soft and pliable even after years of use.
* 3 full layers. Middle layer of 1/2″ thick silica insulation. Rated at 1800 degrees continuous and ability for short excursions to 3000 degrees.
* Faster Spool Up.
* Lower underhood temps.
* Cooler Intake air temps.
* Lower exhaust gas temps.
* Fast Install, usually less than 15 minutes.
* Will not become brittle, stays soft and pliable even after years of use.
* 3 full layers. Middle layer of 1/2″ thick silica insulation. Rated at 1800 degrees continuous and ability for short excursions to 3000 degrees.
NOT RECOMMENDED FOR STAINLESS HOUSINGS
