Description
This is turbo blanket fits T6 flange turbos with a 1.32 or 1.25 a/r typically used as the atmosphere or large turbo in a compound twin setup. Comes with ties for installation.
* Faster Spool Up.
* Lower underhood temps.
* Cooler Intake air temps.
* Lower exhaust gas temps.
* Fast Install, usually less than 15 minutes.
* Will not become brittle, stays soft and pliable even after years of use.
* Made specifically for your turbo, not one size fits all.
* 3 full layers. Middle layer of 1/2″ thick silica insulation. Rated at 1800 degrees continuous and ability for short excursions to 3000 degrees.
NOT RECOMMENDED FOR STAINLESS HOUSINGS
